Your Cart
No products in the cart.
Free shipping on all orders over $450
CI Alum Boiler Treatment – Nitrite-Based Corrosion Inhibitor for Aluminum Boiler Systems
Controlled-pH Corrosion Inhibitor for Aluminum Boiler Systems
CI Alum Boiler Treatment is built specifically for aluminum hot-water boilers and closed heating loops operating below 900 psi — systems that can be damaged by standard high-pH boiler treatments meant for steel. Its controlled pH around 8 protects aluminum surfaces from chemical attack while the nitrite inhibitor helps prevent oxygen-driven corrosion and internal film loss. This is not a general boiler compound for every system in the building; it is the treatment for aluminum equipment where the wrong chemistry can shorten boiler life instead of protecting it. Used properly, it helps prevent leaks, fouling, and heat-transfer loss in aluminum-based heating systems — the kind of failures that turn into unplanned shutdowns and emergency service calls during peak heating season — while giving operators a treatment program that matches the metal actually in the loop.
$287.00 / 20 L pail
Technical Data
Technical Data
Technical Properties
CI Alum Boiler Treatment
Controlled-pH nitrite boiler treatment formulated specifically for aluminum hot-water boilers and closed heating loops operating below 900 psi. Built for systems where standard high-pH steel-boiler chemistry is the wrong tool and can do more harm than good.
Product Type
Nitrite-Based Boiler Compound for Aluminum Systems
Technology Base
Controlled-pH Nitrite Corrosion Inhibitor Chemistry
Primary Function
Protect Aluminum Boiler Surfaces from Corrosion Without Overdriving pH
Application Role
Closed-Loop Treatment for Aluminum Hot-Water Boilers and Mixed-Metal Heating Systems
Performance Focus
Aluminum Compatibility, Oxygen-Corrosion Control, and System Stability
Operational Mechanism
Nitrite Forms a Protective Film While Controlled pH Helps Avoid Chemical Attack on Aluminum
Process Target
Aluminum Boilers, Closed Hydronic Loops, and Mixed-Metal HVAC Heating Circuits
Operational Benefit
Helps Prevent Leaks, Fouling, and Heat-Transfer Loss Caused by the Wrong Boiler Chemistry
Use Environment
Commercial Buildings, HVAC Heating Systems, Institutional Plants, and Industrial Aluminum Boiler Installations
Program Fit
Material-Specific Corrosion Protection Step in Aluminum Boiler Water-Treatment Programs
Maintenance Value
Gives Operators a Chemistry Match for Aluminum Equipment Instead of Forcing a Steel-Boiler Treatment into the Wrong System
System Limit
For Aluminum Boiler Systems Operating at Less Than 900 psi
Operational Notes
• This product exists because aluminum systems are not steel systems — standard high-pH boiler chemistry can be the wrong fit
• Best used where the operator needs corrosion control in aluminum boilers without pushing chemistry into a range that risks surface attack
• Strong fit for closed-loop heating systems where aluminum components or mixed metals make material compatibility the real issue
• Nitrite-based protection matters when oxygen exposure and internal corrosion are the failure mode you are trying to stop
• Distinct from general boiler compounds: this is the material-specific treatment for aluminum equipment, not a generic “boiler protector”
• Useful where operators want to avoid the tube leaks, fouling, and service calls that follow mismatched water treatment chemistry
Practical Fit
CI Alum Boiler Treatment is the corrosion inhibitor for aluminum boiler systems that cannot tolerate the same chemistry used in ordinary steel loops. It belongs where operators need to protect aluminum surfaces, control oxygen-driven corrosion, and avoid learning the hard way that the wrong treatment can shorten boiler life instead of extending it.
Available project water-treatment materials describe this product as a nitrite-based boiler compound with a controlled pH of 8 for aluminum boiler systems operating at pressures of less than 900 psi. The same file separately identifies an aluminum boiler cleaning detergent at pH 7.5 to 8, which reinforces that the aluminum niche in the line is defined by material compatibility rather than generic boiler protection language. This block therefore positions CI Alum Boiler Treatment as the aluminum-system corrosion treatment, not a general-purpose steel-boiler compound. :contentReference[oaicite:0]{index=0}
Documents
Related Documents
Viewers Also Liked
Drop-count field test kit for verifying orthophosphate residual in phosphate-based water treatment programs. CI Orthophosphate…
Drop-Count Alkalinity Test Kit for Monitoring “P” and “T” Alkalinity in Industrial Water Systems Drop-count…
Pre-Startup and Post-Descaling Boiler Cleaning | Removes Oil, Grease, and Process Contaminants Before Treatment Chemistry…
Drop-count test kit for sulfite residual in boiler, cooling, and closed-loop water treatment programs. CI…
Steam Boilers and High-Condensate Systems | Eliminates Dissolved Oxygen Before It Pits Tubes and Drums…
Inhibited ethylene glycol heat transfer fluid for closed-loop systems requiring freeze protection to −50°C. Inhibited…
