Section 01 · WW · 25 products

Lagoons, lift stations and collection systems run on biology and time. This section covers the products that keep both on the operator’s side: bacterial and enzyme programs for lagoon and lift-station treatment, bio-accelerators for sludge reduction and upset recovery, sewer maintenance and odour control, and bulk treatment chemicals for municipal water and wastewater plants.

Municipal Wastewater

Municipal Wastewater · 8 products

Lagoon & Lift Station

Bacterial and enzyme programs for lagoon and lift-station treatment.

Featured product
DBProduct image
CI Digester BioEnzyme product packaging
WW104Catalogue No.
MunicipalWater systemsIndustrial
Lagoon & Lift Station

CI Digester BioEnzyme

Enzymatic waste digestion for industrial, municipal, and agricultural wastewater systems

CI Digester BioEnzyme is a concentrated, biologically engineered solution designed to enhance the performance of wastewater systems by targeting and breaking down complex organic waste. Formulated with a synergistic blend of facultative aerobic and anaerobic bacteria along with specialized enzymes, CI Digester delivers reliable and sustained microbial activity across a wide range of environmental conditions. It actively digests fats, oils, grease (FOG), proteins, starches, and cellulose—restoring system balance, reducing sludge accumulation, and mitigating odor issues common in lagoons, aerated basins, and holding tanks. Unlike traditional treatments that mask problems or require heavy mechanical intervention, CI Digester works from within the system to accelerate biological breakdown processes, liquefy solids, and support the natural microbial ecosystem.

Key points
  • It actively digests fats, oils, grease (FOG), proteins, starches, and cellulose—restoring system balance, reducing sludge accumulation, and mitigating odor issues common in lagoons, aerated basins, and holding tanks.
PackagingOrder code
12 × 1 L110410
4 × 4 L110412
20 L110414
210 L110418
Consult current label, SDS and technical data sheet before use.
Request quote
Technical program · Section 01

Lagoon program: liquid enzyme plus granular bioenzyme

CI’s lagoon programs pair continuous liquid enzyme dosing with periodic granular inoculation. The liquid catalyst accelerates breakdown of proteins, fats and carbohydrates in the water column; the granular product adds living, cold-adapted bacteria to the sludge interface. Together they reduce solids, BOD and odour faster than either alone. Seasonal, upset and sludge-specific products extend the program.

01
Continuous liquid dosingOrganic load in the water column
Concentrated enzyme and facultative bacterial treatment dosed weekly; digests fats, oils, grease, proteins, starches and cellulose across aerobic and anaerobic conditions.
Digester BioEnzymeWW104
02
Granular inoculationSludge interface and cold-climate biology
Water-soluble packets of freeze-dried aerobic and facultative bacteria with enzymes; colonizes the sludge layer so digestion continues in anaerobic micro-environments.
Chemzyme Dry Bacteria StrainWW103
03
Seasonal supportTemperature extremes
Cold-water formulation holds biological function between 3 °C and 15 °C; high-temperature formulation supports activity at 25.5 °C and above.
ColdZone BioLiftWW006HotZone BioLiftWW007
04
Upset recovery and start-upToxic shock, overload, new cells
Targeted bacterial blend restores microbial balance after biological upsets or when bringing new systems online.
Respond Lagoon BoostWW108
05
Sludge reductionCompacted sludge and dredging cost
Granular peroxide-based oxygen release penetrates and aerates compacted sludge; enzyme-activated spikes target sludge build-up where treatment capacity is declining.
OxyBoost BioAcceleratorWW107Sludge SharksWW109
Program monitoring: sludge depth at multiple points, staff odour assessment and water clarity, taken at baseline, mid-program and end of program. Dosing rates are set per lagoon by CI technical service.
BLProduct image
CI BioLink Lift Station | Automated Grease Control for Lift Stations product packaging
WW101Catalogue No.
Municipal
Lagoon & Lift Station

CI BioLink Lift Station | Automated Grease Control for Lift Stations

Smart bacterial block for automated grease and odor control

CI BioLink Lift Station is a dual-action bacterial block for automated grease and odor control in lift stations, wet wells, and collection systems. The inner core delivers fast-acting pseudomonas for immediate impact; the outer shell gradually releases grease-eating bacillus strains and biostimulants for sustained long-term treatment. Hang beneath the incoming flow line — the block dissolves completely over 2–10 weeks depending on daily volume (50,000–300,000 GPD), delivering continuous microbial dosing with zero residue or netting required.

Key points
  • Primary functionGrease buildup breakdown
  • Performance focusReduced grease, BOD, and H₂S
  • Use environmentMunicipal wastewater infrastructure
PackagingOrder code
2 × 4 kg103765
Consult current label, SDS and technical data sheet before use.
Request quote
BGProduct image
CI Biotrap Grease Trap Renovator product packaging
WW102Catalogue No.
MunicipalWater systemsIndustrial
Lagoon & Lift Station

CI Biotrap Grease Trap Renovator

Natural floating degreaser for lift stations and wet wells with continuous odor control

CI BioTrap is a concentrated, 100% d-Limonene degreaser and odor control agent for lift stations, wet wells, and wastewater collection systems. Its non-emulsifying formula floats on the water surface, forming a persistent odor-blocking layer while coating and stripping grease from walls with each water level cycle. Fully biodegradable and safe for active biological treatment — won't drive grease deeper into the system.

Key points
  • Built-in red indicator dye signals when reapplication is needed.
  • All-natural floating degreaser and odor control treatment for lift stations and wet wells, formulated to dissolve heavy grease buildup while helping control persistent wastewater odours.
PackagingOrder code
4 × 4 L102852
20 L102854
205 LEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
CDProduct image
CI Chemzyme Dry Bacteria Strain product packaging
WW103Catalogue No.
MunicipalWater systemsIndustrial
Lagoon & Lift Station

CI Chemzyme Dry Bacteria Strain

Dry biological treatment for wastewater systems, grease traps, and organic waste breakdown

CI ChemZyme is a concentrated dry biological treatment packed with selected bacterial strains and enzymes that naturally digest grease, oils, paper, detergents, and suspended solids in wastewater systems. Shelf-stable and easy to dose — bacteria colonize rapidly on contact, breaking down organic matter at the source while suppressing anaerobic odors. Safe for lift stations, grease traps, septic systems, and lagoons.

Key points
  • Primary functionWaste management and system optimization
  • Performance focusSystem efficiency and biological support
  • Use environmentMunicipal and industrial wastewater
PackagingOrder code
20 × 2 lb106314
Consult current label, SDS and technical data sheet before use.
Request quote
CBProduct image
CI ColdZone BioLift – Cold Water Lagoon Ammonia Treatment product packaging
WW006Catalogue No.
MunicipalWater systems
Lagoon & Lift Station

CI ColdZone BioLift – Cold Water Lagoon Ammonia Treatment

Cold-water lagoon treatment that supports biological function and reduces ammonia, BOD, TSS and sludge between 3 °C and 15 °C

CI ColdZone BioLift is a cold water lagoon treatment designed to support biological function and reduce ammonia, BOD, TSS, and sludge in wastewater systems operating at low temperatures. Its targeted formula maintains consistent activity between 3°C and 15°C, making it suitable for seasonal and year-round use in colder climates.

Key points
  • CI ColdZone BioLift is a targeted cold water lagoon treatment formulated to maintain biological performance in wastewater systems exposed to low temperatures.
PackagingOrder code
18 lbWW006
Consult current label, SDS and technical data sheet before use.
Request quote
EAProduct image
CI Excelsior Advanced BioEnzyme product packaging
WW105Catalogue No.
MunicipalIndustrialWater systems
Lagoon & Lift Station

CI Excelsior Advanced BioEnzyme

Advanced biostimulant solution for reliable wastewater and soil rehabilitation in refinery operations

CI Excelsior is an advanced biostimulant solution engineered for wastewater and soil rehabilitation in petroleum refining operations. Targets the complex contaminant profiles unique to modern refineries — petroleum hydrocarbons, glycols, amines, sulfides, and heavy metals — that cause nitrification failures and operational upsets. Accelerates breakdown of COD and petroleum-based contaminants, reduces algae and organic buildup in lagoons, and stabilizes biological treatment through targeted micronutrient delivery.

Key points
  • Primary functionProcess reliability enhancement
  • Performance focusContaminant and solids management support
  • Use environmentHigh-load wastewater operations
PackagingOrder code
10 × 1 lb113005
10 × 1 LEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
GDProduct image
CI Grease D Solve Plus product packaging
WW106Catalogue No.
Municipal
Lagoon & Lift Station

CI Grease D Solve Plus

Floating 50% d-limonene degreaser for lift stations, drains and grease traps — grease removal with citrus odour control

CI Grease d Solve Plus is a powerful, all-natural drain cleaner designed to unclog and maintain drains and grease traps effectively. Formulated with 50% d-Limonene, an orange peel extract known for its natural grease-cutting properties, it quickly dissolves greasy buildups, organic debris, and fatty deposits while leaving a pleasant citrus fragrance.

Key points
  • Primary functionGrease dissolution and surface control
  • Performance focusSurface grease separation and control
  • Use environmentMunicipal and wastewater infrastructure
PackagingOrder code
4 × 4 L117512
22.7 L117515
205 L117518
Consult current label, SDS and technical data sheet before use.
Request quote
HBProduct image
CI HotZone BioLift – High Temperature Wastewater Treatment product packaging
WW007Catalogue No.
MunicipalWater systems
Lagoon & Lift Station

CI HotZone BioLift – High Temperature Wastewater Treatment

High-temperature lagoon treatment that supports biological activity and reduces BOD, ammonia, TSS and sludge at 25.5 °C and above

CI HotZone BioLift is a high temperature wastewater treatment designed to support biological activity and reduce contaminants in lagoons operating at 78°F (25.5°C) and above. Its formulation includes biostimulants, biocatalysts, and facultative bacteria capable of maintaining metabolic function in low-oxygen, high-temperature environments. This treatment aids in the consistent reduction of BOD, ammonia, TSS, and sludge, improving overall lagoon performance during warmer operational periods.

Key points
  • Ideal for seasonal peaks or thermally influenced systems, CI HotZone BioLift is applied in convenient water-soluble packs for efficient shoreline dosing.
  • Each pail contains twenty 1-lb bags.
  • Recommended dose of CI HotZone BioLift is based on application needs.
PackagingOrder code
18 lbWW007
Consult current label, SDS and technical data sheet before use.
Request quote
Municipal Wastewater · 3 products

Bio-Accelerators

Bio-accelerators for sludge reduction and upset recovery.

OBProduct image
CI OxyBoost BioAccelerator product packaging
WW107Catalogue No.
MunicipalWater systems
Bio-Accelerators

CI OxyBoost BioAccelerator

Granular oxygen source for accelerated sludge digestion and odor reduction in lagoons

CI OxyBoost BioAccelerator is a granular, peroxide-based oxygen release agent that penetrates and aerates compacted sludge layers in wastewater lagoons. The granules settle through the water column and dissolve slowly at the bottom, liberating active oxygen directly into the organic mass — disrupting anaerobic zones, suppressing hydrogen sulfide and methane odors, and creating aerated channels that accelerate microbial digestion.

Key points
  • Pairs directly with CI Sludge Sharks and CI Digester to supercharge biological breakdown and reduce dependence on mechanical dredging.
  • Designed for monthly dosing in municipal, industrial, and agricultural lagoon systems.
PackagingOrder code
20 kg128313
20 × 1 kgEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
RLProduct image
CI Respond Lagoon Boost product packaging
WW108Catalogue No.
MunicipalWater systems
Bio-Accelerators

CI Respond Lagoon Boost

Targeted bacterial blend for fast recovery of lagoon systems after upset or during start-up

CI Respond Lagoon Boost is a specially formulated bacterial treatment designed to rapidly restore functionality and microbial balance in wastewater treatment lagoons after biological upsets, overload conditions, toxic shocks, or when bringing new systems online. Its proprietary blend of fast-growing heterotrophic bacteria is supported by bio-stimulants that accelerate bacterial reproduction and metabolic activity. One of the key advantages of CI Respond is its use of strains selected for rapid flocculation .

Key points
  • These bacteria are able to form bio-flocs that settle and stay in the system rather than washing out—critical for fast population recovery and long-term performance.
  • This floc-forming property also improves settling and sludge characteristics during recovery phases.
PackagingOrder code
10 kg132108
Consult current label, SDS and technical data sheet before use.
Request quote
SSProduct image
CI Sludge Sharks product packaging
WW109Catalogue No.
MunicipalWater systems
Bio-Accelerators

CI Sludge Sharks

Enzyme-activated biological spikes for targeted sludge reduction in wastewater lagoons

CI Sludge Sharks are a next-generation sludge reduction solution designed for wastewater lagoon systems facing excessive sludge buildup, declining treatment capacity, or rising dredging costs. These biological treatment spikes are pre-formed, easy to apply, and engineered to deliver high concentrations of specialized bacteria, enzymes, and nutrients directly to the sludge layer where they’re needed most.

Key points
  • Once deployed into the lagoon, the spike dissolves and releases fast-acting microbial agents that begin breaking down complex organic solids, including fats, oils, grease, and cellulose.
  • This helps improve hydraulic retention times and overall lagoon functionality.
PackagingOrder code
25 × 150 g135505
Consult current label, SDS and technical data sheet before use.
Request quote
Municipal Wastewater · 4 products

Sewer Infrastructure

Sewer maintenance and odour control.

4AProduct image
CI 444 Attack Sewer Solvent product packaging
WW110Catalogue No.
MunicipalIndustrialFood service
Sewer Infrastructure

CI 444 Attack Sewer Solvent

Non-acid caustic granular drain and sewer opener with aluminum activators for fast, aggressive exothermic action

CI 444 Attack is a heavy-duty, non-acidic granular drain opener formulated for industrial and municipal use. It contains a high concentration of caustic alkali, activated with fine aluminum needles that initiate a vigorous exothermic reaction upon contact with water. This reaction produces substantial heat and turbulence, effectively breaking down and dissolving common clogging agents including fats, oils, hair, cellulose, protein-based debris, and hard water scale.

Key points
  • CI 444 Attack is NSF Registered (L1), making it suitable for use in food processing environments such as canneries, packing houses, and commercial kitchens.
  • Compatible with steel and cast iron piping when used as directed.
PackagingOrder code
12 × 1 kg148010
22.7 kg148016
Consult current label, SDS and technical data sheet before use.
Request quote
LFProduct image
CI Lemon Fury Municipal Grade Odor Counteractant product packaging
WW016Catalogue No.
MunicipalIndustrial
Sewer Infrastructure

CI Lemon Fury Municipal Grade Odor Counteractant

Solvent-free odor counteractant for wastewater and solid waste environments

CI Lemon Fury is a solvent-free liquid odor counteractant built for municipal and industrial environments where biological treatment must remain uninterrupted. Neutralizes hydrogen sulfide, ammonia, and decomposition odors at the source — without harming the microbial activity essential to wastewater and septic system performance. Fully water-soluble for spray, pour, or injection application across sewer mains, lagoons, garbage containers, holding tanks, and collection areas.

Key points
  • Sewer odor control agent formulated for municipal and wastewater applications where persistent malodours need to be suppressed without complicating routine system maintenance.
PackagingOrder code
4 × 4 LWW016X
20 LWW016
210 LEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
STProduct image
CI Sewer Tracer Dye product packaging
WW015Catalogue No.
MunicipalIndustrialFacilities
Sewer Infrastructure

CI Sewer Tracer Dye

Specialized highly visible, biodegradable dye for precise sewer flow studies and leak detection

Designed for both industrial and commercial use, CI Sewer Tracing Dye’s non-natural color promotes safe usage and controls public reactions, ensuring your study’s effectiveness while minimizing environmental impact. The dye is harmless to wildlife when used in proper concentrations and will not affect the operation of wastewater treatment processes. Flow Mapping & Analysis: Use for accurate flow-time studies and volume analysis in plumbing, sewer drains, and storm water systems.

Key points
  • Biodegradable fluorescent tracing dye formulated for sewer investigations, flow tracking, leak detection, and environmental diagnostic work where visible movement through a system needs to be confirmed fast.
PackagingOrder code
4 × 4 LWW015
20 LEnquire
210 LEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
SSProduct image
CI Silt & Sand Flush product packaging
WW014Catalogue No.
Municipal
Sewer Infrastructure

CI Silt & Sand Flush

Polymer-based sewer flushing agent for removing mud, silt, and sediment buildup

CI Silt & Sand Flush is a polymer-based dispersant that breaks apart and suspends accumulated mud, silt, sand, and sediment in storm and sanitary sewer systems. Its charged polymer formulation penetrates compacted deposits, separating solids so they move freely during standard flushing or jetting operations. Non-corrosive and environmentally compatible — integrates directly into routine maintenance schedules for sewer mains, storm drains, lift stations, and retention basins.

Key points
  • Reduces backup risk, extends infrastructure life, and restores hydraulic capacity without emergency intervention.
PackagingOrder code
20 LWW014
Consult current label, SDS and technical data sheet before use.
Request quote
Municipal Wastewater · 10 products

Municipal Water Treatment Chemicals

Bulk treatment chemicals for municipal water and wastewater plants.

A4Product image
CI Alum 48 product packaging
WW111Catalogue No.
Water systemsMunicipalFacilities
Municipal Water Treatment Chemicals

CI Alum 48

48% aluminum sulfate coagulant for charge neutralization and floc formation in potable water and wastewater treatment

CI Alum 48 is an aqueous aluminum sulfate coagulant used for charge neutralization and floc formation in potable water and wastewater treatment. Upon hydrolysis, the product forms aluminum hydroxide precipitates that enmesh suspended solids and colloidal material. CI Alum 48 exhibits predictable stoichiometric behavior and is well suited for facilities with sufficient raw water alkalinity or established alkalinity correction systems.

Key points
  • Typical applications include conventional surface water treatment, wastewater phosphorus precipitation, and systems engineered specifically for alum-based coagulation.
  • When clarifier blankets are weak, pin floc is escaping, or effluent looks visibly dirty.
PackagingOrder code
Packaging on requestEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
C5Product image
CI Caustic 50 product packaging
WW112Catalogue No.
Municipal Water Treatment Chemicals

CI Caustic 50

50% sodium hydroxide solution for rapid pH adjustment and alkalinity control without added calcium or suspended solids

CI Caustic 50 is a high-purity sodium hydroxide solution used for rapid pH adjustment and alkalinity control. The product provides immediate hydroxide availability and precise pH correction without introducing calcium or suspended solids. CI Caustic 50 is suitable for automated feed systems, membrane treatment processes, coagulation pH trim, and neutralization of acidic waste streams. Due to its high reactivity, accurate metering and appropriate safety controls are required.

PackagingOrder code
Packaging on requestEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
HLProduct image
WW113Catalogue No.
MunicipalWater systemsFacilities
Municipal Water Treatment Chemicals

CI Hydrated Lime

High-reactivity calcium hydroxide powder for bulk alkalinity addition and pH elevation

CI Hydrated Lime is a high-reactivity calcium hydroxide powder used for bulk alkalinity addition and pH elevation. The product provides significant hydroxide and calcium availability and is commonly applied in wastewater treatment, lagoons, softening processes, and phosphorus precipitation systems. CI Hydrated Lime is most appropriate for facilities equipped with slurry preparation and solids handling infrastructure.

Key points
  • Scaling and solids generation must be considered in system design and operation.
PackagingOrder code
Packaging on requestEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
H1Product image
CI Hypo 12 product packaging
WW114Catalogue No.
Water systemsMunicipal
Municipal Water Treatment Chemicals

CI Hypo 12

Liquid sodium hypochlorite (≈12%) for microbial inactivation and chlorine residual maintenance

CI Hypo 12 is a liquid chlorine disinfectant that generates hypochlorous acid upon addition to water. The product provides effective microbial inactivation and chlorine residual maintenance without the storage and handling risks associated with compressed chlorine gas. CI Hypo 12 is suitable for drinking water disinfection, wastewater treatment, and odor control applications. Degradation due to temperature, light exposure, and storage time should be considered in inventory management.

PackagingOrder code
Packaging on requestEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
POProduct image
CI PAA Oxidizing Disinfectant product packaging
WW115Catalogue No.
Municipal
Municipal Water Treatment Chemicals

CI PAA Oxidizing Disinfectant

Peracetic acid oxidizing disinfectant for rapid microbial inactivation with minimal sensitivity to temperature and organic load

CI PAA is a fast-acting oxidizing disinfectant composed of peracetic acid, hydrogen peroxide, and acetic acid. The product provides rapid microbial inactivation with minimal sensitivity to temperature and organic loading. CI PAA decomposes into water, oxygen, and acetic acid and does not form chlorinated disinfection byproducts or persistent residuals. It is primarily used for wastewater effluent disinfection where chlorine residuals and dechlorination are undesirable.

PackagingOrder code
Packaging on requestEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
P1Product image
CI PACL-10 product packaging
WW116Catalogue No.
Municipal Water Treatment Chemicals

CI PACL-10

Pre-hydrolyzed poly-aluminum chloride coagulant (≈10% Al₂O₃) for rapid charge neutralization and dense, settleable floc

CI PACL-10 is a pre-hydrolyzed aluminum coagulant containing polymerized aluminum species that provide rapid charge neutralization and efficient particle destabilization. The product exhibits reduced alkalinity consumption relative to aluminum sulfate and demonstrates stable performance across a wide pH range, including cold-water conditions. CI PACL-10 produces dense, settleable floc with lower overall sludge volume and improved downstream dewatering characteristics.

Key points
  • Suitable for drinking water clarification, wastewater treatment, and phosphorus removal applications where process stability and reduced chemical correction are required.
PackagingOrder code
Packaging on requestEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
PProduct image
CI Permanganate – CAIROX® product packaging
WW117Catalogue No.
Municipal
Municipal Water Treatment Chemicals

CI Permanganate – CAIROX®

Potassium permanganate (KMnO₄) oxidant for pretreatment oxidation in drinking water and wastewater systems

CI Permanganate – CAIROX® is a strong inorganic oxidant used for pretreatment oxidation in drinking water and wastewater systems. The product is effective for oxidizing iron, manganese, hydrogen sulfide, and taste-and-odour compounds, and for controlling certain algae-related byproducts. Reaction products form manganese dioxide solids that are subsequently removed by clarification or filtration. The characteristic purple color provides a visible indicator of overdosing.

Key points
  • The product is not intended for primary disinfection.
PackagingOrder code
Packaging on requestEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
PDProduct image
CI Polymer DW-8812 product packaging
WW118Catalogue No.
Municipal Water Treatment Chemicals

CI Polymer DW-8812

High-molecular-weight cationic emulsion polymer for mechanical sludge dewatering (Zetag® 8812S equivalent)

CI Polymer DW-8812 is a high–molecular weight cationic emulsion polymer designed for mechanical sludge dewatering applications. The product provides strong charge neutralization and polymer bridging, producing shear-resistant floc suitable for belt filter presses, centrifuges, and screw presses. CI Polymer DW-8812 improves cake solids concentration and centrate clarity when properly conditioned. Performance is dose-sensitive and optimized through bench or full-scale testing.

PackagingOrder code
Packaging on requestEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
PMProduct image
CI Polymer MS-60 product packaging
WW119Catalogue No.
MunicipalIndustrial
Municipal Water Treatment Chemicals

CI Polymer MS-60

Cationic emulsion polymer for continuous municipal sludge conditioning and solids separation (PCEN-60 equivalent)

CI Polymer MS-60 is a cationic emulsion polymer formulated for continuous municipal sludge conditioning and solids separation. The product offers consistent performance across variable sludge characteristics and is well suited for large-volume applications, clarifiers, lagoons, and upstream conditioning of mechanical dewatering systems. CI Polymer MS-60 provides reliable floc formation with moderate shear resistance and forgiving dose response, supporting stable long-term plant operation.

PackagingOrder code
Packaging on requestEnquire
Consult current label, SDS and technical data sheet before use.
Request quote
SAProduct image
WW120Catalogue No.
Water systemsMunicipalFacilities
Municipal Water Treatment Chemicals

CI Soda Ash 58

Sodium carbonate (≈58%) alkalinity source for buffering capacity and pH stabilization in water and wastewater systems

CI Soda Ash 58 is a moderate-strength alkalinity source used to increase buffering capacity and stabilize pH in water and wastewater treatment systems. The product primarily increases carbonate alkalinity with a controlled pH response, making it well suited for supporting alum or PACL coagulation in low-alkalinity waters. CI Soda Ash 58 is operator-forgiving, introduces minimal scaling risk, and provides predictable alkalinity restoration for drinking water treatment facilities.

PackagingOrder code
Packaging on requestEnquire
Consult current label, SDS and technical data sheet before use.
Request quote

Specify it, or ask us to.

Send us the order codes you need, or describe the facility and our technical desk will map the program with you. Supplied from Edmonton to BC, Alberta and Saskatchewan.

Chem InternationalA division of Aliysha Enterprises Ltd.10770 180 St NW, Edmonton, AB T5S 2S4info@chemintonline.comchemintonline.comISO 9001:2015