Your Cart
No products in the cart.
Free shipping on all orders over $450
CI Gluticide 15 – Glutaraldehyde Microbiocide for Water Systems
Glutaraldehyde microbiocide for slime, SRB, and algae in recirculating cooling and process water systems.
Registered microbiocide (PCP #31043) based on 15% glutaraldehyde for control of slime-forming bacteria, sulfate-reducing bacteria, and algae in open recirculating cooling water, air washers, industrial scrubbing systems, service water, and heat-transfer systems including evaporative condensers, hydrostatic sterilizers and retorts, and pasteurizers. Designed for programs that need two separate operating modes: slug-dose cleanup when a system is already fouled, and continuous maintenance feed once control has been established. This is the microbiological cleanup and control product for systems where biofouling is real. It does not replace the cooling water compound; it runs beside it whenever bacterial slime, SRB-driven underdeposit corrosion pressure, or algae growth are part of the problem.
$629.00 / 20 L pail
Technical Data
Technical Data
Technical Properties
CI Gluticide 15
Registered glutaraldehyde microbiocide for recirculating cooling and process water systems where slime-forming bacteria, sulfate-reducing bacteria, and algae are real operating problems. Built for both slug-dose cleanup of fouled systems and continuous-feed maintenance once biological control has been established.
Product Type
Glutaraldehyde Microbiocide for Cooling and Process Water
Active Chemistry
15% Glutaraldehyde
Regulatory Status
PCP Registration No. 31043
Primary Function
Control Slime-Forming Bacteria, SRB, and Algae
System Fit
Open Recirculating Cooling Water, Process Water, Service Water, and Heat Transfer Systems
Application Range
Air Washers, Industrial Scrubbing Systems, Pasteurizer Cooling Water, and Auxiliary Water Systems
Heat Transfer Equipment Fit
Evaporative Condensers, Hydrostatic Sterilizers and Retorts, Pasteurizers, and Warmers
Cleanup Mode
Intermittent Slug Dosing for Fouled Systems
Maintenance Mode
Continuous Feed or Repeat Maintenance Dosing Once Control Is Established
Initial Dose Band
333 mL to 1333 mL per 1000 L of System Water Until Control Is Achieved
Maintenance Dose Band
100 mL to 333 mL per 1000 L Weekly or as Needed to Maintain Control
Addition Point
Add at Basin, Sump, Reservoir, or Other Collection Point for Uniform System Distribution
Operational Notes
• This is the microbiological cleanup and control product for systems where biofouling is already a live issue, not just a theoretical one
• Slug dosing is the right lane when the system is noticeably fouled and a maintenance-only approach will be too weak
• Once control is evident, the program steps down into lower maintenance dosing rather than staying at cleanup intensity
• The sheet expressly warns that badly fouled systems should be cleaned before treatment begins
• Distinct from CI B-10: B-10 is the simpler fast-acting bronopol shock biocide, while Gluticide 15 is the broader microbiological control product with explicit foul-system cleanup and maintenance modes
• Does not replace the cooling water compound; it runs beside the scale-and-corrosion program whenever slime, SRB activity, or algae are part of the operating problem
Practical Fit
CI Gluticide 15 belongs in recirculating cooling and process water systems where biological fouling is already affecting performance or clearly trending that way. It is the glutaraldehyde microbiocide for programs that need both a real cleanup mode and a steady maintenance mode, while the cooling water compound continues handling scale and corrosion.
Documents
Related Documents
Viewers Also Liked
Inhibited ethylene glycol heat transfer fluid for closed-loop systems requiring freeze protection to −50°C. Inhibited…
Steam Boilers and High-Pressure Systems | Eliminates Dissolved Oxygen Faster Than Standard Sulfite | Catalyzed…
Pre-Startup and Post-Descaling Boiler Cleaning | Removes Oil, Grease, and Process Contaminants Before Treatment Chemistry…
Condensate-Line Corrosion Inhibitor for Steam Distribution and Return Systems CI No. 45 is the condensate-side…
Moderate-protection propylene glycol heat transfer fluid for closed-loop systems requiring non-toxic chemistry. CI H-150 is…
Scale and corrosion treatment for open recirculating cooling towers running a monitored control program. Concentrated…
